CM5000 User Manual
UM-CM5000-FW3.5.2.0-REV0.0
2019-07-08
www.ateme.com
Page 123
• ASI out 2 to encoder 1 ASI in.
• ASI out 1 to encoder 2 SYNC in.
• SDI3 to encoder 2 channel 1 SDI in.
• SDI4 to encoder 2 channel 2 SDI in.
• ASI out 2 to encoder 2 ASI in.
• ASI out 1 final output.
Note
The input labelled SYNC in is also an ASI input.
G.1.2. Configuration
Channels
The 4 channels need to have the same ES configuration: same quality/latency trade off, same video/audio/data codec
at the same bitrate.
Configure the TS program numbers and ES PID with different values for each channel if you don't want the remuxer
to remap the PIDs numbers automatically.
Encoder 1 channels
On channel 1 disable the ASI output.
On channel 2 enable the ASI output.
Encoder 1 Remuxer
Enable ASI output.
Enable Input TS 1 as Internal Channel1. In the more section let the delay at 0ms.
Enable Input TS 2 as ASI ASI input. In the more section let the delay at 0ms.
Configure the output bitrate with at least the sum of the program 101 and 102.
Encoder 2 channels
On channel 1 disable the ASI output.
On channel 2 enable the ASI output.
Encoder 2 Remuxer
Enable ASI output.
