CM5000 User Manual
UM-CM5000-FW3.5.2.0-REV0.0
2019-07-08
www.ateme.com
Page 101
snmpset -v2c -c private $HOST \
ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioAc3BitRate.1.1.3 i 320000
#ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioAc3BitRate.1.1.3 = INTEGER: 320000
snmpset -v2c -c private $HOST \
ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioAc3IsEnhanced.1.1.3 i 1
#ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioAc3IsEnhanced.1.1.3 =
# INTEGER: true(1)
snmpset -v2c -c private $HOST \
ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioAc3MetadataSourceSource.1.1.3.1 i 2
#ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioAc3MetadataSourceSource.1.1.3.1 =
# INTEGER: user(2)
snmpset -v2c -c private $HOST ATEME-KYRION2-MIB::\
kyrion2ChannelCfgTsEsAudioAc3InformationDialogNormalization.1.1.3 i -10
#ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioAc3InformationDialogNormalization.1.1.3
# = INTEGER: -10
• And finally set the PID and add an audio language descriptor:
Note
For the PID, the value 0 means 'Auto'.
snmpset -v2c -c private $HOST \
ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioTsPid.1.1.3 i 200
#ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioTsPid.1.1.3 = INTEGER: 200
snmpset -v2c -c private $HOST \
ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioTsIso639LanguageCode.1.1.3 s eng
#ATEME-KYRION2-MIB::kyrion2ChannelCfgTsEsAudioTsIso639LanguageCode.1.1.3 =
# STRING: eng
A.3.3. Remuxer Presets
A.3.3.1. Loading/saving remuxer presets
This is done in the same way as loading/saving a channel preset but with using:
• kyrion2RemuxerCommandSavePreset for save index
• kyrion2RemuxerCommandLoadPreset for load index
• and kyrion2RemuxerCommandAction for command
See Section A.3.2.1, “ Loading/saving channel presets ”
The following example reads the name of preset #3, loads it to remuxer 1 active configuration, and stores it in slot #5.
