CM5000 User Manual
UM-CM5000-FW3.5.2.0-REV0.0
2019-07-08
www.ateme.com
Page 145
I.1.1. Notes
(1) SCTE-104 messages must respect the following restrictions when they are used to generate SCTE-35:
- They should use the multiple_operation_message() format. All single_operation_message() are discarded.
- They should contain only one operation per multiple_operation_message(). If more than one operation is present in
the same multiple_operation_message(), the following ones are discarded.
- They should contain only splice_null_request_data() and splice_request_data() operations. Other operations are
discarded.
(2) Low Roll-off feature may need an upgraded modulator hardware
(3) MPEG-4 Maximum bitrate is limited to 100 Mbps on Encoder board Type 1
(4) MPEG-4 Minimum bitrate is limited to 3.2Mbps with Low Latency or Ultra Low Latency Presets
(5) 1080p or MPEG-4 Ultra Low Latency Preset are not available with Encoder board Type 1
(6) ReMux License or WebGUI Thumbnails are available only with Encoder board Type 3
(7) HEVC video codec is only available on HEVC ready platforms.
