Asymtek C702, Student Manual

Page: 48 / 82

Level 2 Maintenance Training, Century Series 2-22 P/N 73-0028-00 Revision A
Level 2 Module 2
STUDENT GUIDE
LESSON 15 Temperature Controllers
OBJECTIVE : Upon completion of this lesson, the student should be able to
describe what cable connections are used for temperature control.
TEMPERATURE CONTROLLERS
THE HT1000
Controls one DC
device, such as the
Needle Heater
vacuum.
THE HT2000
Capable of
controlling two AC
devices (such as a
heated tooling plate
and a radiant heat
element.), two DC
devices (such as two
Needle Heating
Elements), or one
AC and one DC
device.
EXERCISE 2-13 Connecting HT1000 Cables
1. Plug the Temperature Controller Power Cable into the Temperature Controller Main Power
Inlet.
2. Plug the Controller 1 J-type Thermocouple Cable into the J-type Thermocouple.
3. Plug the Controller1 Cable into HT-XX.
EXERCISE 2-14 Connecting HT2000 Cables
1. Plug the Temperature Controller Power Cable into the Temperature Controller Main Power
Inlet.
2. Plug the Controller 1 J-type Thermocouple Cable into the J-type Thermocouple.
3. Plug the Controller1 Cable into HT-XX.