ASV SC50 Scout, Service & Repair Manual

Page: 91 / 111

9. Inspect the seal for any damage. (fig. 13-24)
10. Remove the allen bolts securing the upper casting
to the drive motor. (fig. 13-24)
11. Remove the upper casting from the drive motor to
expose the clutch discs. (fig. 13-25)
12. Inspect the discs for discoloration (blueing) or for
signs of excessive wear. (fig. 13-26)
Note: If any of the individual discs measure less than
.015” replace them as a set.
Assembly
1. Replace worn or damaged components, thorough-
ly clean all parts, then reassemble the motor by
reversing the disassembly procedure.
Drive Motor
(motor portion)
Disassembly
1. Mark the casing across the parting lines as shown
to ensure correct reassembly of the drive motor.
(fig. 13-27)
2. Remove the allen bolts securing the output end of
the drive motor to the main casting and remove it
from the motor as shown. (fig. 13-28, 13-29)
13-6
Rubber Track Utility Vehicle
13. Hydraulic Component Service
13-24
Seal
Bolts
13-25
13-26
13-27
13-28
Required Tools
Allen Wrench/Socket
Snap Ring Pliers
Screwdriver (blade type) (seal removal if needed)
13-29
Bolts
https://tractormanualz.com/