ASV SC50 Scout, Service & Repair Manual

Page: 67 / 111

Shuttle Block
Removal
1. Relax any hydraulic actuators to relieve pressure
within the hydraulic system.
2. Turn the ignition switch to the OFF position and
remove the key to avoid accidental start.
3. Remove the belly pan beneath the engine.
4. Drain the hydraulic fluid from the machine as
described on page 4-8 of this manual.
5. Label, then disconnect the hoses from the top and
bottom of the shuttle block as shown. (fig. 10-23)
6. Disconnect the tubes from the front of the shuttle
block. (fig. 10-24)
7. Remove the bolts securing the block to the chassis
as shown. Support the block when removing the
bolts to avoid dropping it. Remove it from the
machine. (fig. 10-25, 10-26)
Installation
1. To install the shuttle block, reverse the removal
procedure.
10-6
Rubber Track Utility Vehicle
10. Hydraulic Components
Required Tools
Combination Wrench
Socket Wrench
10-23
10-24
10-25
remove
10-26
https://tractormanualz.com/