ASV SC50 Scout, Service & Repair Manual

Page: 95 / 111

5. Remove the swash plate along with the bearings
and inspect them for any damage or scratching
that could affect operation. (fig. 13-46, 13-47)
6. Remove the snap ring holding the shaft, seal and
bearing into the casing, then remove the seal.
(fig. 13-48)
Note: If you are repairing the existing pump, you will
need to replace the outer seal as it will be destroyed
upon removal.
7. Using a rubber mallot, gently tap the shaft and
bearing out of the case for inspection or replace-
ment. (fig. 13-49)
13-10
Rubber Track Utility Vehicle
13. Hydraulic Component Service
13-46
Swash Plate
13-47
Surfaces
Bearings
13-48
13-49
https://tractormanualz.com/