ASV SC50 Scout, Service & Repair Manual

Page: 48 / 111

9. Now that the starter has been removed, there is
clearance to remove the throttle pivot. Slide it out
towards the engine and remove. (fig. 7-8)
Installation
1. To install the throttle lever assembly, reverse the
removal procedure.
Note: Figure 7-9 has been included to show the order
of assembly for the internal components of the throttle.
Please use this figure as a reference to ensure correct
assembly during throttle installation.
Cargo Bed
Removal
1. Remove the retaining nuts securing the cargo bed
sides to the cargo bed, then remove both sides.
(fig. 7-10)
2. Remove the bolts securing the cargo bed to the
chassis as shown. (fig. 7-11)
3. Have an assistant help you to remove the cargo
bed from the machine. (fig. 7-12)
Installation
1. To install the cargo bed, reverse the removal pro-
cedure.
7-3
Rubber Track Utility Vehicle
7. Chassis and Fuel Tank
7-8
7-9
outside inside
Combination/Socket Wrenches
Required Tools
7-10
7-11
7-12
https://tractormanualz.com/