ASV SC50 Scout, Service & Repair Manual

Page: 73 / 111

3. Remove the wing nuts from the battery retaining
tension rods as shown. (fig. 11-3)
4. Lift and remove the battery retaining bar and ten-
sion rods by pivoting them out of the console as
shown. (fig. 11-4)
5. Slide the battery out of the console and remove.
(fig. 11-5)
Installation
1. To install the battery, reverse the removal proce-
dure.
Exhaust System
Removal
The exhaust system is very hot at operating tem-
perature. Make sure the machine is off and cool
before attempting to service the exhaust system.
1. Remove the forward belly pan to access the
exhaust system.
Note: Removal of the cargo bed (page 7-3) may make
muffler removal easier, but it is not required.
2. Remove the nuts on the exhaust clamp that
secures the muffler to the exhaust pipe. (fig. 11-6)
3. Loosen the muffler clamp fasteners until they
release, then slide the muffler rearward, and then
away from the chassis to remove it. (fig. 11-7)
11-2
Rubber Track Utility Vehicle
11. Engine
11-4
11-6
11-7
11-3
Required Tools
Combination/Socket Wrench
Pliers (if jointed section must be disassembled)
Penetrating Lubricant
!WARNING!
11-5
https://tractormanualz.com/