ASV SC50 Scout, Service & Repair Manual

Page: 53 / 111

5. Remove the bolts securing the undercarriages to
the torsion axles. (fig. 7-34)
6. Support the undercarriages with a forklift or
hydraulic jacks (rolling style), then slide them off of
the axles. Guide the hoses out of the chassis as
you remove the undercarriages from the machine.
Note: Grease the axles thoroughly prior to removing
the undercarriages from the machine. Also, If move-
ment is difficult, it may be helpful to use a port-a-power
to help push them off of the axles while supporting the
weight with a forklift or rolling hydraulic jacks.
7. Support the weight of each axle with a hydraulic
jack, then remove the bolts securing it to the chas-
sis. (fig. 7-35)
8. Once all bolts have been removed, lower each
axle to the ground and remove it from the
machine.
Installation
1. To install the torsion axles, reverse the removal
procedure.
7-8
Rubber Track Utility Vehicle
7. Chassis and Fuel Tank
7-34
7-35
remove
https://tractormanualz.com/