ASV SC50 Scout, Service & Repair Manual

Page: 65 / 111

9. Once the bolts have been removed, slide the
pump backwards out of the engine. (fig. 10-12)
10. Rotate the pump until it is sideways inside the
chassis as shown. to help it to clear the other
components inside the engine compartment during
removal. (fig. 10-13)
11. Lift the drive pump out of the engine compartment
with the engine hoist as shown. (fig. 10-14)
Installation
1. To install the drive pump, reverse the removal pro-
cedure.
10-4
Rubber Track Utility Vehicle
10. Hydraulic Components
10-12
10-13
10-14
10-15
To
Tank
(return)
To
Drive Motor
(LT)
To
Drive Motor
(RT)
From
Charge
Pump
Top & Bottom Drive Pump Hoses
• View is from the right.
Bottom
Top
Front
Rear
10-16
Bottom
Top
Front
Rear
Right and Left Drive Pump
Hoses
from shuttle bk (btm rt)
from shuttle bk (top rt) from shuttle bk (btm lt)
from shuttle bk (top lt)
• View is from the right.
• The pump is to be perceived as transparent.
• Ports are labeled right or left as they are on the pump.
RH LH RH LH
input shaft
10-17
Bottom
Top
Front Rear
Top Drive Pump Hose
To
Pilot Gen
Block
top
Plugged
• View is from the right.
to two-speed/brake manifold
LH
input shaft
input shaft
https://tractormanualz.com/