AstroJet M1DX Operator'S Manual Download

Page: 35 / 97

SECTION 2

ASSEMBLE/INSTALL PRINTER

[A] Carefully remove Printhead
Cartridge from foil packaging

Tear foil at notch or cut the end
with scissors.

[B] Remove protective plastic
cover.

Hold Printhead by handle

and unclip cover from Printhead.

[C] Remove protective strip from
Printhead Electrical Contacts

Once removed, DO NOT allow
strip to touch electrical contacts.

[D] Remove protective strip from
Printhead Nozzles.

Hold Printhead

by the handle. Pull strip tab and
slowly peel strip from Printhead.

DO NOT pull strip at less than a
45° angle from Printhead surface.
DO NOT allow removed strip to
touch Printhead Nozzles.

Carefully insert Cartridge into compartment at an angle

[4]

, with Printhead surface facing down and Ink

Nozzles facing Ink Hoses. Once seated, gently tilt Cartridge back until it snaps into an upright position

[5]

DO NOT FORCE Cartridge into position.

Summary of Contents for M1DX

































































































Search results

Summary of Contents for M1DX

Reviews:

Related manuals for M1DX

Brands by name

Popular brands

AstroJet M1DX, Operator'S Manual

Search results

Summary of Contents for M1DX

Reviews:

Related manuals for M1DX

Brands by name

Popular brands