AstroJet M1DX Operator'S Manual Download

Page: 20 / 97

SECTION 2
ASSEMBLE/INSTALL PRINTER

Printer Driver (Top Printer)

Before installing the Printer Driver on the

Top Printer:

If the Top Printer already has a Printer Driver installed,

you will have to uninstall the existing Printer Driver from the

Top Printer

. If the Top Printer is new or has never

been installed you can proceed to

“Install Printer Driver”

NOTE:

The Duplex Printer's software is preinstalled.

The Duplex Printer should not be connected to the Top Printer for this step.

Uninstall Existing Printer Driver

NOTE: If installing a new Top Printer (

never installed

), you can skip this step and

proceed to “Install Printer Driver”.

Make sure

Top Printer

is plugged in and turned ON,

USB is disconnected and that no jobs are pending.

The Duplex Printer should not be connected to the
Top Printer for this step.

Open

“All Programs”

, then find and select the

Memjet

Folder.

Open the

“M Series Driver”

folder and click on

“Uninstall”

Select (

highlight

) the desired Printer and click

“Remove One”

NOTE: Clicking “Remove All” without
selecting a Printer will remove all listed
Printers and associated Drivers.

The next window asks if you want to
continue. Click

“Yes”

The Printer Driver will be uninstalled.

Summary of Contents for M1DX

































































































Search results

Summary of Contents for M1DX

Reviews:

Related manuals for M1DX

Brands by name

Popular brands

AstroJet M1DX, Operator'S Manual

Search results

Summary of Contents for M1DX

Reviews:

Related manuals for M1DX

Brands by name

Popular brands