AstroJet M1DX Operator'S Manual Download

Page: 25 / 97

SECTION 2

ASSEMBLE/INSTALL PRINTER

License Agreement.

Check “I accept…” then click

“Next>”

Printer Connections.

Click

“Configure to print using

the Network”

. Make sure the Printer is connected to the

Network. Then click

“Next>”

Printers Discovered.

A list of available Printers opens.

Check the

Printer

column to verify you have an

M-Series

printer. Check the

Hardware ID

column and match the

number listed to the number you copied previously from
the Printer label. Select that Printer. Click

“Next>”.

NOTE: If the Printer does not appear on the list, the IP
address may have to be assigned manually. See “Install
Over Network Connection, Version B”.

Installing Printer Software.

Software download begins.

Would You Like to Install This Device Software?

Click

“Install”

Summary of Contents for M1DX

































































































Search results

Summary of Contents for M1DX

Reviews:

Related manuals for M1DX

Brands by name

Popular brands

AstroJet M1DX, Operator'S Manual

Search results

Summary of Contents for M1DX

Reviews:

Related manuals for M1DX

Brands by name

Popular brands