18
800-810-WIRE (9473) • www.sargentlock.com • A7690C
4/15/08
Copyright
©
2008 SARGENT Manufacturing. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing is pr
ohibited.
Exit Device Plug-in Connector Installation
10
4
2
1
3
1. Finish mounting exit device per instruction sheet provided
2. Plug rail connectors into raceway connectors. Then feed through 1” hole in door
Install rail mounting bracket with two screws supplied. Install rail insert and end cap
To insure trouble free operation, check that the push rail can be fully depressed
On vertical rod exit devices, adjust rods and check that the latch bolts do not go into hold back position until the push
rail is fully depressed
3. Plug raceway connector(s) into electric hinge connector(s) then feed through door prep.
Note: Electric hinge will have two 8-pin connectors or two 8-pin and two 4-pin connectors.
Mount electric hinge to door side only
4. Go to (A) if wiring now. Go to (B) if wiring is to be done later
A. Refer to Input/Output Terminations - Section 11 through Wiring Examples - Section 14
Wire to loose wires on pigtail harness(es) as required using connectors allowed by local code. Plug pigtail harness
connector(s) into electric hinge connector(s)
Feed harnesses through frame prep and mount electric hinge
Ensure wiring is correct; apply power and test exit device
Refer to operating instructions in section 15
B. Plug pigtail harness connector(s) into electric hinge connector(s)
Feed harness(es) through frame prep and mount electric hinge
Pigtail harness assemblies with
8 & 4-pin connectors (shown)
Pigtail harness with 8-pin
connectors only may be supplied
depending on application
Electric hinge with 8 & 4-pin connectors (shown).
Electric hinge with 8-pin connectors only may be
supplied depending on application
Raceway harness with
8 & 4-pin connectors
and 3 loose wires
59- 80 Series Rail with
8 & 4-pin connector
and 3 loose wires
Mounting
bracket
Screw
location
1” dia. hole
in door
Note: Typical raceway location is
shown. Other locations may exist
depending on door type
A7690C.indd 18
11/8/18 9:02 AM