1
A7690C • 800-810-WIRE (9473) • www.sargentlock.com
4/15/08
Copyright
©
2008 SARGENT Manufacturing. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing is pr
ohibited.
NOTE: Field cut rail assemblies are not allowed.
Exit Device must be ordered for specific 80 series type, specific door width
and finish from the factory. Consult factory with any questions @ 800-810-WIRE (9473).
The SARGENT 59- Electroguard™ is designed for areas which require a delayed egress requiring an alarm at the door when
any attempt is made to violate the door. The Electroguard™ can be tied into a fire alarm system, indicate latchbolt status and
control an alarm at a remote location when the door is in violation.
NOTE: Proper connections and appropriate peripheral hardware is required.
Part No.
Description
52-2994
59- Circuit Board Replacement Kit for
“F” size rails
(Includes one 52-2558 circuit board and
“F” size rail
harness)
52-2995
59- Circuit Board Replacement Kit for
“J” size rails
(Includes one 52-2558 circuit board and
“J” size rail
harness)
52-2996
59- Circuit Board Replacement Kit for
“G” size rails
(Includes one 52-2558 circuit board and
“G” size rail
harness)
52-2558
Electroguard™ Circuit Board only
52-2204
Latchbolt Harness and Switch Assembly for 59-8800 and 8500 Rim Devices
52-2217
Surface Vertical Rod Harness and Switch Assembly for 59-8700 Devices
52-2220
Concealed Vertical Rod Harness and Switch Assembly for 59-8600 and 8400 Devices
52-2224
Latchbolt Harness and Switch Assembly for 59-8900 and 8300 Mortise Devices
Mounting rail
insert
Mounting
plate
Endcap
Circuit board
Cover
Chassis
assembly
Switch
assembly
Exit Device
Chassis Assembly
and Rail Assembly
Electroguard™
Circuitry
1” diameter hole required for
routing wires into the door
Manual dogging is
provided standard on
non fire rated devices
General Description
Parts Breakdown
1
2
A7690C.indd 1
11/8/18 9:01 AM
