15
A7690C • 800-810-WIRE (9473) • www.sargentlock.com
4/15/08
Copyright
©
2008 SARGENT Manufacturing. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing is pr
ohibited.
8800 Ortho Front View Dwg
Chassis microswitch
Wire holder
Rail assembly
Rail wire & connector
Rail
assembly
Push rail
Installing 59-8800/12-59-8800 Series Rim Exit Device
General Touch Bar
CAUTION – BEFORE STARTING:
• Check hand of door (This device is handed and not reversible)
• Door should be fitted and hung
• Verify box label for size of exit device, function and hand
• Install mullion in frame if used
IMPORTANT: Surface of door where
exit device is to be applied must be
flush. Clear away any raised projections
to allow exit device to rest on flat
surface of door
Lock Down Key —
7/32” hex key
To operate: Depress
pushrail, insert hex key
and turn clockwise
(Not furnished with 12-)
8800 Main Chassis Dwg
Chassis
(12-8810
shown)
Strike #649
Guarded
latchbolt
Cover
Chassis
arm
Horizontal reference
line (CL mounting holes)
Vertical
reference
line (CL
chassis)
Rail wire
& connector
Wire & connector
Wire holder
APPLY HARDWARE AND RAIL ASSEMBLY.
Refer to Instruction sheet A6770
1. Depress chassis arm and slide rail assembly onto chassis, capturing the wire from the rail assembly in the wire holder
2. Feed the rail wire along the same path as the chassis wire. Snap the connectors together. Wire tie away from moving
parts (as illustrated)
3. Apply covers and strike per instruction sheet A6770 and finish installation per Section 10 within this manual
PREPARE DOOR –
Refer to Instruction sheet A6770
Exit Device Installation (continued)
A7690C.indd 15
11/8/18 9:02 AM
