Asentria Teleboss 850, User Manual

Page: 195 / 223

TeleBoss 850 2.06.280_STD User Manual
Page 189
Data Release Commands
Command Summary Syntax Description
ACCESS
Set file access ACCESS [file_number] Access a specific file for data release
CLEAR
Clear released records CLEAR Deletes all the records released via one of
the RL commands. Records not released
are not deleted.
COMPRESS Release compressed
records COMPRESS [ON\OFF] When ON, releases records in compressed
format where spaces are replaced by an
alpha character; when OFF, released
records exactly as received.
ESC/ESC/ESC Escape command ESC/ESC/ESC Stops the release of data. If used when
releasing data in LINE mode, records not
yet displayed are still considered released
and will be deleted when the CLEAR
command is issued.
NEXT Sends the next record
or block of records NEXT When WAIT is ON, the NEXT command
causes records to be released according to
the previously issued RELEASE command.
PRT Set data partition PRT Sets a partition to separate existing data in
a file from any new data
RL
Release data RL
RLn
RL@nnn
RLn@nnn Releases the data stored in a data file. RL
release all data in the partition; RL
n
releases just n number of records; RL@ nnn
release all records beginning a record
number
nnn ; RL n @ nnn release n number
of records beginning at record number nnn .
RLMODE Set the release mode RLMODE
RLMODE LINE
RLMODE CBB
RLMODE XMODEM
By itself, RLMODE displays what the
current release mode is. Followed by
LINE, CBB, or XMODEM, it sets the
RLMODE to one of those methods.
TAG Prepend a line number
to records TAG [ON|OFF] By itself, TAG displays the current setting.
When set to ON, TAG will prepend a six-
digit line number (beginning with 000001)
to call records as they are released.
TRIM Delete records in a
data file. TRIM n TRIM followed by a number of records will
delete that many records from the
beginning of a data file, whether they have
been released already or not. To delete
the entire file, enter TRIM followed by a
number that is greater than the number of
records in the file.
WAIT
Sets the “wait for next”
mode
WAIT [ON|OFF] By itself, WAIT displays what the current
wait mode is. When set to ON, data
release will not start after the RL command
is given, but instead will “wait” until the
NEXT command is sent.
ZERO Deletes records from
all data files. ZERO After issuing this command, the user is
prompted with “Are you sure (y/n)?”.
Selecting “y” will delete all data in all data
files (including the Audit and Event logs).