TeleBoss 850 2.06.280_STD User Manual
Page 153
CCM 5 (Cisco CallManager version 5.x)
Cisco CallManager version 5.x sends call records to the T850 using FTP. Therefore, the T850 must be configured to
allow an incoming FTP connection from the CCM, including logging in with a user name and password. To do this,
there are three things to configure
– two on the T850 and one on the CCM.
On the T850:
1) Configure IPRC for CCM 5 as shown:
TeleBoss 850 - IP Record Collection (IPRC) Setup
A) IP Record Collection [CCM 5]
B) Store Collected Data In [FILE1]
2) Configure any unused user with User Name:
ccm
, Password:
ccm
, Allow User Connection via
FTP
, and Upon
Login the Go To
COMMAND
. The remaining menu options do not matter.
TeleBoss 850 - User Setup Menu
A) Enable This User Access [ON]
B) User Name [ccm]
C) Password [********]
D) User Profile Expiration Date/Time []
E) Allow User Connection via [F]
F) Upon Login then Go To [COMMAND]
G) Set Access/Pass-through Pointer To [FILE1]
H) Pass-through Permissions
I) After PT, ESC Takes User To [MENU]
J) PPP Connection [LOCAL]
K) Setup/Status Rights [MASTER]
L) File Release Permissions
M) File Delete Permissions
N) Additional Authentication Options
On the CCM:
The user should consult with the Cisco technical personnel for exactly how to configure the CCM, but here is a brief
outline of the Data File Transfer parameters that must be configured:
Transfer Type: (your preference)
Push
– Daily
Push
– Weekly
Push
– Monthly
None
IP Address:
<the IP address of the T850>
Remote User:
ccm
Remote Password:
ccm
Compress File Before Transfer:
NO
Other settings on the CCM are your preference and Asentria cannot give advice as to how any of those should be set.
Summary of Contents for Teleboss 850
Page 6: ......
