ASCOM Ascotel 2025, System Manual

Page: 1037 / 1141

ascom Ascotel 2025/2045/2065
7.38 Operations Supervision HBT_20321104_07/B0_en
4.1.1 Event Types
Tab. 7.6: Event types
Event / error message Trigger condition Details
Power Loss Event message once mains power is
restored
• Mains power has failed more fre-
quently than entered in the trigger
table
Date, time at which mains power
was restored
Card Missing / Defective Communication error
Mainboard <> Card
• Card missing or defective Type of defective card, date and
time
Malfunction <with
3-digit error ID> Hardware error during self-test Error ID, date and time
Malfunction <with
5-digit error ID> General error during operation Error ID, date and time. For more
details see
Tab. 7.7
CL Printer Jam No response from system printer for past
4 minutes
• Printer out of paper or switched off. Printer identification code, date
and time
Too many event messages "Sync Loss on T / T2", "Outgoing Call
Rejected" and "No Response from Net-
work"
• Number of message types exceeds
limit entered in the table
Date, time
Total Sync. Loss Synchronization with network has failed
on all T / T2 interfaces Date, time
Sync. Loss on T / T2 A T / T2 interface entered in the clock
pool has lost the system clock. Line, date, time
Overflow Network access attempted when all lines
are seized or the PBX is overloaded. Type of overload, date, time
Outgoing Call Rejected Call rejected by the network
• On any line: error code 34
• On required line group:
error code 44
Line, cause, date, time
No response from network No answer to call setup on T / T2 inter-
face Line, date, time
No response from SC No answer to incoming DDI call from
digital subscriber on S bus or AD2 DDI, date, time
Ext. Signal destination not
responding External signal destination not automat-
ically reachable Date, time
No response from local sig-
nal destination Local output blocked or not available Date, time
V.24 Mail system defective Invalid characters received on V.24 inter-
face for Voice Mail Server Date, time