manualshive.com logo in svg

ASCOM Ascotel 2025, System Manual

Get to know your ASCOM Ascotel 2025 better with the System Manual available for free download on manualshive.com. This comprehensive manual provides detailed instructions on how to operate and maximize the features of your ASCOM Ascotel 2025. Download your copy today and enhance your user experience.

Share
Download
background image

ascom 

Ascotel 2025/2045/2065

5.52

Configuration Parameters

HBT_20321104_05/B0_en

Display language; Terminal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_3_2_2
Display; Terminal data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_3_2_2
Do not disturb; Destinations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_4_7
Door bell; Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_4_5
Door bell; Door bell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_4_5
Door intercom system; Door bell  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_4_5
DS unique destination; CDE: Enhanced settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_2_1_2
DS unique destination; CDE: Enhanced settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_2_1_3
DS unique destination; CDE: Enhanced settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_2_3_1
DTE state; V.24 on Pocket Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_1_1_4
DTMF automatic; Terminal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_3_2_2
Duration; Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_1_2_1
Echo cancelling; System parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_1_3_1_1
Emergency number; Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_4_6
Emergency number; Emergency number  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_4_6
Enable; ERC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_2_1_11
Enable; S-bus PSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_1_3_2_1
Ending line; CDE: KT lines  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_2_1_2
Ending line; CDE: KT lines  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_2_1_3
Ending line; CDE: KT lines  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_2_3_1
Ending line; Line key  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_3_2_1
Enter ICL data; Common . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_2_1_2
Enter ICL data; Common . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_2_3_1
Entries; Routing table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  AM_3_3
Entry number; Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_1_2_1
Entry; Barred list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_3_1_8_1
Entry; Busy indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_3_1_7
Entry; Free list  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_3_1_8_1
Entry; Private entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_3_2_2
Equipment ID (EID); Licensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_1_2_2
Equipment ID (EID); PBX information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_1_1_1
Equipment ID (EID); System information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_4_1
ERC; External remote control (ERC)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_2_1_11
Ethernet MAC address; IP configuration Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CM_1_4_2
Event counter; Event log  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_3_2
Event log; Event log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_3_1
Event log; PBX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FM_3
Event message if wake-up call not acknowledged; Wake-up call  . . . . . . . . . . . . . . . . . . . .  HM_1_5
Event message; Card failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_3_1
Event message; Event messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_3_1
Event message; Main voltage failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_3_1
Event message; System failures  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_3_1
Event messages; Event log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_3_1
Event messages; Event table 1 to 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_2_1
Event messages; Event tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_1_3
Event messages; PBX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FM_1
Event table 1 to 4; Event table configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_2_1
Event table configuration; Event table configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_2_1
Event table configuration; PBX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FM_2
Event tables; Event messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FM_1_3

Summary of Contents for Ascotel 2025






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Ascotel 2025

Xantrex Freedom e-GEN Checklist preview
Freedom e-GEN
Brand: Xantrex Pages: 4
Xantrex AGS Owner'S Manual preview
AGS
Brand: Xantrex Pages: 20
Panasonic SC-PM250 Operating Instructions preview
SC-PM250
Brand: Panasonic Pages: 2
AddPac AP-VP280 Installation And Operation Manual preview
AP-VP280
Brand: AddPac Pages: 269
Magnavox Magnavox FW 55C Manual preview
Magnavox FW 55C
Brand: Magnavox Pages: 80
PAC P1C-GM12 Installation Manual preview
P1C-GM12
Brand: PAC Pages: 12
Bang & Olufsen BeoSound 3000 2671 Service Manual preview
BeoSound 3000 2671
Brand: Bang & Olufsen Pages: 68
2VV IC3-CONTROL Installation And Operation Manual preview
IC3-CONTROL
Brand: 2VV Pages: 29
Manta MM2040 TOUCHBOX User Manual preview
MM2040 TOUCHBOX
Brand: Manta Pages: 16
Daktronics Sportsound SSR-300 Quick Start Manual preview
Sportsound SSR-300
Brand: Daktronics Pages: 6
SMART Room System SRS-Lync-XL Assembly Manual preview
Room System SRS-Lync-XL
Brand: SMART Pages: 2
Invacare LINX ACU User Manual preview
LINX ACU
Brand: Invacare Pages: 45
ALLEN & HEATH dLive CDM32 Getting Started User Manual preview
dLive CDM32
Brand: ALLEN & HEATH Pages: 14
Inter-Tel Basic Digital Phone User Manual preview
Basic Digital Phone
Brand: Inter-Tel Pages: 90
Aiphone NHX SYSTEM series Operation Manual preview
NHX SYSTEM series
Brand: Aiphone Pages: 12
Polycom CX 200 Quick Start Manual preview
CX 200
Brand: Polycom Pages: 4
Symetrix Prism 0x0 Quick Start Manual preview
Prism 0x0
Brand: Symetrix Pages: 4
Skov 131546 Technical User Manual preview
131546
Brand: Skov Pages: 28

Brands by name

Popular brands

Load more brands