ASCOM Ascotel 2025, System Manual

Page: 311 / 1141

ascom Ascotel 2025/2045/2065
2.134 Call Routing HBT_20321104_02/B0_en
5.2.3.2 Release Destination if Dialling is Incomplete
If the direct dial number is incompletely dialled, the outside call will be routed to
the call destination element allocated to the trunk group after 8 seconds and then
forwarded to the destinations entered there.
Scope
Valid only if the network provider transmits the digits of the direct dial numbers
using the overlap receiving method. If the direct dial numbers are transmitted
using the en-bloc method, an incomplete direct dial number will never be trans-
mitted to the PBX.
5.3 Outgoing Traffic
All outgoing calls are routed to a network via a route.
The authorization to make outgoing calls can be specified for each
subscriber (Page 2.148).
Digit barring facilities can also be used to regulate dialling access on the basis of
the numbers dialled (Page 2.136).
The feature "Priority exchange allocation" can be used to give priority to a sub-
scriber wishing to set up an outgoing call (Page 2.148).
The LCR (Least Cost Routing) function is used to control automatically the path (in
the PBX and in the network) via which an outgoing call is to be routed (Page
2.155).