Arthrex Angel Operator'S Manual Download Page 7

Page: 7 / 108

Overview

Angel

cPRP System

Operator’s Manual

Chapter 4: Programmability Option

Figure 4-1 The “Protocols” tab ............................................................................................................... 4-2

Figure 4-2 The Keyboard Screen (Protocol Name) ............................................................................... 4-2

Figure 4-3 “Protocols” tab of the Menu Screen ...................................................................................... 4-6

Chapter 6: Routine Care

Figure 6-1 Unlock Code Screen ............................................................................................................. 6-2

Figure 6-2 Software Validated Screen ................................................................................................... 6-3

Figure 6-3 Install Screen ........................................................................................................................ 6-3

Figure 6-4 New Software Screen ........................................................................................................... 6-4

Figure 6-7 Removing the Centrifuge Adaptor Plate ............................................................................... 6-8

Figure 6-8 Removing the Spring Plate and Springs .............................................................................. 6-9

Figure 6-9 Cleaning On and Around the Adaptor Base ......................................................................... 6-9

Figure 6-10 Fuse Replacement: Pry Open Cover ............................................................................... 6-10

Figure 6-11 Fuse Replacement: Slide Out Holders ............................................................................. 6-10

This is not a warranty document. For all warranty information, including disclaimers, exclusions, terms,

conditions and related provisions refer to the “

Arthrex U.S. Product Warranty

” section of the Arthrex, Inc.

website, found

at www.arthrex.com whose

provisions are incorporated herein by reference.

Summary of Contents for Angel













































































































Search results

Summary of Contents for Angel

Reviews:

Related manuals for Angel

Brands by name

Popular brands

Arthrex Angel, Operator'S Manual

Search results

Summary of Contents for Angel

Reviews:

Related manuals for Angel

Brands by name

Popular brands