Arthrex Angel Operator'S Manual Download Page 22

Page: 22 / 108

Overview

1-4

Angel

cPRP System

Operator’s Manual

Special tools, equipment and environmental requirements

There are no special tools required to install and set up this device.

PRECAUTION

Prior to the first use, follow the installation instructions included in

this manual.

Visual Inspection

Upon delivery, ensure that the unit’s shipping carton has not been damaged. If there

are signs of damage, a formal complaint must be made at once to the transport

agent. Check the unit carefully to ensure that there are no missing parts or visible

signs of damage. Any complaints, together with a detailed account of the problems

identified must be immediately reported to either the local representative or directly to

Arthrex, Inc. at the following address:
Arthrex, Inc.

Telephone: + 1 800-391-8599

1370 Creekside Blvd

[email protected]

Naples, FL 34108 USA

www.arthrex.com

Unpacking/Assembly

1. Open the shipping carton and remove the

Angel System

and all ancillary

components.

Unpacking Tip – Unwrapping the Stator Arm:

It is important to note the following when unpacking/ installing the Angel Centrifuge.

Failure to heed this recommendation could lead to system malfunction:

Summary of Contents for Angel













































































































Search results

Summary of Contents for Angel

Reviews:

Related manuals for Angel

Brands by name

Popular brands

Arthrex Angel, Operator'S Manual

Search results

Summary of Contents for Angel

Reviews:

Related manuals for Angel

Brands by name

Popular brands