Arthrex Angel Operator'S Manual Download Page 62

Page: 62 / 108

Processing

3-24

Angel

cPRP System

Operator’s Manual

Close Button

Touching the Close Button will close the Information Screen and return

to the previously displayed End of Case Screen or “

Tally

” tab.

Up Arrow Button

Touching the Up Arrow Button will display the next six newest cases

(it’s disabled if there are no cases newer than those already displayed).

Down Arrow Button

Touching the Down Arrow Button will display the next six older cases

(it’s disabled if there are no cases older than those already displayed).

Output Screen

The Output Screen is displayed by touching the “

Output

” Button and is used to save

either a case tally table or a case log to a connected USB storage device. In addition

the “

Output

” Button allows the operator to save a case log through the

Angel System’s

USB Port (see Figure 3-19).

For detailed instructions on how to save case tally tables and logs, refer to “

Saving

Case Data

” on page 3-6.

1. Close Button

1. Up Arrow Button

2. Down Arrow Button

Figure 3-19 Output Screen

The case number (as assigned by the

Angel System)

, and the number of data lines the

selected case contains (in parenthesis), is displayed in the upper left corner of the

Output Screen.

Summary of Contents for Angel













































































































Search results

Summary of Contents for Angel

Reviews:

Related manuals for Angel

Brands by name

Popular brands

Arthrex Angel, Operator'S Manual

Search results

Summary of Contents for Angel

Reviews:

Related manuals for Angel

Brands by name

Popular brands