Arthrex Angel Operator'S Manual Download Page 58

Page: 58 / 108

Processing

3-20

Angel

cPRP System

Operator’s Manual

Figure 3-15 Tally Tab of the Menu Screen

The information and all interface buttons present in the “

Tally

” tab of the Menu Screen

are identical to those contained in the End of Case Screen. For a detailed description,

read “

End of Case Screen

” on page 3-17.

For instructions on how to save case data from the “

Tally

” tab, refer to the “

Saving

Case Data

” on page 3-6.

Protocols Tab

The “

Protocols

” tab allows for the creation and management of custom protocols.

See Chapter 4: Programmability Option.

Settings Tab

The “

Settings

” tab is used to change the volume of audible alarms, set the date and

time, and to check for new software versions (see Figure 3-16).

Summary of Contents for Angel













































































































Search results

Summary of Contents for Angel

Reviews:

Related manuals for Angel

Brands by name

Popular brands

Arthrex Angel, Operator'S Manual

Search results

Summary of Contents for Angel

Reviews:

Related manuals for Angel

Brands by name

Popular brands