Arthrex Angel, Operator'S Manual

Page: 41 / 108

Processing
Angel ® cPRP System Operator’s Manual
3-3
Note: If the Insufficient fill alarm is triggered, see the response in “ Alarms and
Notifications
” on page 5-1.
Figure 3-3 Run Screen
During the collection of the blood components, the volumes displayed and the
process time displayed may be adjusted by the system software to reflect more
accurate values.
Once separation is complete, and all components are collected, the End of Cycle
Screen is displayed on the Angel System’s Touch Screen Display (see Figure 3-4).
Figure 3-4 End of Cycle Screen
Note: If the cycle needs to be stopped before the separation process has been
completed, please refer to “ Stop Button ” on page 3-26.
After each processing cycle, the PRP may be diluted to increase the total volume,
by drawing back the PRP syringe plunger. This will draw PPP from the PPP
Compartment of the Three-Compartment Reservoir Bag into the PRP syringe.
At the end of the case, the RBC Compartment of the Three-Compartment
Reservoir Bag will contain concentrated red blood cells, while the PPP
For a detailed explanation of
the Run Screen, read “ Run
Screen ” on page 3-14.
For a detailed explanation of
the End of Cycle Screen,
read “ End of Cycle Screen ”
on page 3-16.