Arthrex Angel, Operator'S Manual

Page: 54 / 108

Processing
3-16
Angel ® cPRP System Operator’s Manual
End of Cycle Screen
The End of Cycle Screen appears at the end of each processing cycle and displays the
total volumes collected of the three separated blood components: PPP, PRP, and RBC
(see Figure 3-12).
Figure 3-12 End of Cycle Screen
“New Cycle” Button
If the maximum volume has not been reached and the available
volume is greater than 40 mL, the “ New Cycle ” Button will be
available. Touching the “ New Cycle ” Button begins a new cycle and
displays the Start Screen (see “
Start Screen
” on page 3-12). During and after each
cycle, the operator must pay attention to the PRP volume collected so that the syringe
does not overfill (after touching the “ New Cycle ” Button, the text “ Check PRP
syringe !” will appear beneath the alarm area as a reminder). A maximum of 180 mL
can be processed in up to three (3) cycles for each disposable
“End Case” Button
Touching the “ End Case ” Button ends the current case and displays
the End of Case Screen (see “
End of Case Screen
” on page 3-17).