Arthrex Angel, Operator'S Manual

Page: 95 / 108

Routine Care
Angel ® cPRP System Operator’s Manual
6-9
Figure 6-8 Removing the Spring Plate and Springs
3. Using a disinfecting towelette or a clean, low-linting cloth dipped in disinfectant solution, thoroughly
clean the top of the adapter base, beneath the adapter base in the well, the spring plate, the
adaptor top, the springs and screws, and the Centrifuge Well. Ensure all surfaces remain visibly wet
for the contact time recommended by the disinfectant manufacturer. If required by the disinfectant
manufacturer, rinse per instructions; otherwise, allow to air dry.
Figure 6-9 Cleaning On and Around the Adaptor Base
4. Upon completion of the cleaning procedure:
a. Gather all the parts, wrap them in plastic & place inside the Centrifuge Well.
b. Confirm sufficient cushioning in included in the well (e.g., above & below the parts) to ensure
they will be held firmly in place during transport.
c. Close the lid.
d. Contact Arthrex Customer Service to obtain a Returned Materials Authorization (RMA). See
Return of Used Product for further details.
e. Pack the machine in the return shipping container as instructed.
f. Ensure the RMA Number appears on the outside of the container.
g. Ship as instructed.
Preventive Maintenance Requirements
The
Angel System
is designed to be maintenance free and therefore does not require any Preventive
Maintenance. All calibration and operational checks are performed automatically upon start-up of
the device.