28
8
Open the access door on the left side of the panel and lift out
the disinfection spray handle or use a disinfection spray
bottle.
9
For disinfection spray handle only: Direct the disinfectant
spray towards the bottom of the bathtub and press the
Disinfection button on the control panel.
10 Spray disinfectant into the surface overflow outlet.
(See Fig. 4)
11 For disinfection spray handle only: Press the Disinfection
button on the control panel to turn it off, and place the
disinfectant spray handle back behind the access door.
12 Let the disinfectant act according to the time printed on
disinfectant bottle.
13 When disinfection is completed, reassemble the suction
inlet screen.
14 Press the Patient Shower button on the control panel.
15 Rinse all treated parts clean with plenty of water having a
temperature of approximately 25
°
C (77
°
F) using the
shower handle, to remove disinfectant.
NOTE
Continue with remaining disinfection instructions
according to section
Disinfect (Step 27-42 of 42) on
page 26
.
Fig. 4
