15
Use the Hydromassage™ System
(5 Steps)
1
Before the hydromassage starts, fill the bathtub over the
Hydromassage
system outlet
(A),
according to section
Bathe Patient on page 19
.
(See Fig. 1)
2
Press the
Hydromassage
system button on the control panel
to start the
Hydromassage
system built-in jet.
The default runtime is 15 minutes after which the
hydromassage will automatically end. Wait 15 minutes to
restart.
• The hydromassage can be stopped at any time, during the
15 minutes of runtime, by pressing the
Hydromassage
system button.
• Always turn the
Hydromassage
system off when the
treatment has finished.
3
Adjust the water flow with the knob on the upper right side
of the bathtub.
• Start at a low intensity by turning the knob counter
clockwise.
• Increased the water flow intensity by turning the knob
clockwise.
(See Fig. 2)
4
Adjust the water-jet direction by turning the
Hydromassage
system outlet.
(See Fig. 3)
• Remove the adjustable
Hydromassage
system nozzle, by
pulling it out, if you want the jet to cover a wider area
(See
Fig. 4)
5
When finished the hydromassage, turn the
Hydromassage
system off by pressing the
Hydromassage
system button.
WARNING
To avoid hair entrapments under water, always
install the Hydromassage system suction cover
before use.
Fig. 1
A
Fig. 2
Decrease
intensity
Increase
intensity
Fig. 3
Fig. 4
Hydromassage™ System
