AZI Sales/Customer Service 800-528-7411 or 602-470-1414 or [email protected]
Page 9 of 105
4.
PACKING AND SHIPPING INSTRUCTIONS
IMPORTANT
Movement, handling, and packaging of the instrument must be done with
EXTREME CARE to avoid permanent, expensive internal damage. The MAX
®
4000
uses a delicate and very sensitive electronic force balance to measure small
weights and weight losses. The balance is capable of measuring weight to a
resolution of 0.1 milligrams. Careful handling is necessary to prevent damage to
the balance. With proper care, the instrument will provide years of dependable
service.
UNPACKING
•
Unpack the instrument carefully and set it down gently. Select a place where it will be
safe from bumping, jarring, excessive air currents, and vibration.
•
Check the instrument immediately for any visible damage resulting from rough
handling during shipment.
•
Retain the box and all packaging
materials for any future shipment of the
instrument. If the instrument is returned
to AZI for any reason, place it in the
original packaging materials. Only the
original packaging materials have been
tested and proven effective during
shipment.
•
Install the pan support:
o
Open the lid by lifting the handle just
above the display.
o
Remove the yellow tape, pan support
and packing foam.
o
Save the foam so that it can be taped
in place when the instrument is
returned to the factory for annual
calibration.
o
Gently but firmly install the pan
support into the balance stem.
