PiCUS TMSO Manual
55
7.6.4 (optional) Setting a Measuring Plan
The measurement plan determines the period of
time during which the system actually collects
measurement data and uploads it to the cloud.
If you want to specify a measuring plan already
now, you can do this in the
PLAN
tab. Click on the
respective line for date and time under
Start
and
End Date and Time
.
You can select the desired times in the windows
that open.
NOTE!
The input is in 12h format, morning or afternoon is
selected in the time input window at the top, to the
right of the time
(
AM
/
PM
)
The end time must always be later than the start
time!
If you want to delete an existing measuring plan,
simply set both points in time in the past.
After you have finished your entries you may
transfer the measuring plan to the TMSO.CU by
clicking on
SET.
The confirmation is shown in the status bar at the
bottom.
