Areva MiCOM P125, Technical Manual

Page: 315 / 362

Commissioning Test and Record Sheet P12y/EN RS/D32
MiCOM P125/P126 & P127 Page 3/48
1. COMMISSIONING TEST
1.1 Relay identification
Commissioning date :
Engineer :
Substation :
Circuit :
Network nominal frequency:
MiCOM relay model:
P125 P126 P127
Serial number:
Rated current In :
Rated current Ien :
Rated Voltage primary :
Rated Voltage secondary:
Auxiliary voltage Uaux :
Communication protocol :
Language :
1.2 Commissioning test record
(write OK or No after each checked stage where there is )
Serial number check ?
All current transformer shorting switches closed ?
Wiring checked against diagram (if available)?
Case earth installed ?
Test block connections checked (if installed) ?
Insulation tested ?
1.3 Auxiliary supply control
(write Yes or No after each checked stage where there is )
Auxiliary voltage to relay
Auxiliary voltage value Vdc/Vac
Watchdog contacts
With auxiliary supply off Terminals 35 and 36
With auxiliary supply on Terminals 36 and 37