Areva MiCOM P125, Technical Manual

Page: 269 / 362

Application Guide P12y/EN AP/D32
MiCOM P125/P126 & P127 Page 71/74
10. LOGIC INPUTS AND LOGIC OUTPUTS
10.1 Logic Inputs
In the logic input submenu can be set the digital inputs as active high or active low, can be
chosen the supply type DC or AC and it is possible to set the start/stop of the relevant
auxiliary timers assigned to the inputs by front or edge..
By the ordering code it is possible to select the relay with the digital inputs with EA approval
regulation.
See the technical data for further information.
The setting menu for this functionality is in the CONFIGURATION menu. For more details
see FT (User Guide).
10.2 Logic Outputs
A dedicated output relay is assigned to each logic output. It is possible to set the relays as
self reset or latching.
The setting menu for the functionality of the logic outputs is available in the AUTOMAT.
CTRL menu.
It is possible to assign a specific function to each output relay except RL1.
For more details see the chapter User Guide.