45
PR598A
9. Loosen the clamp (A) securing the air intake boot to
the throttle body and the clamp (B) securing the air
filter housing to the inlet housing boot; then remove
the crankcase breather hose from the crankcase.
PR578A
10. Remove two self-tapping screws securing the air fil-
ter mounting bracket to the frame; then remove the
air filter and mounting bracket as an assembly.
PR140A
11. Remove the throttle arm cover from the throttle
body; then disconnect and remove the throttle cable
and the throttle body.
PR154A
12. Remove the coolant hoses from the water pump and
thermostat housings; then position the upper coolant
line to the left-side of the engine compartment.
PR150A
13. Remove the exhaust duct from the V-belt housing;
then remove the inlet boot connecting the inlet duct
to the V-belt housing.
PR144B
HDX140A