69
Removing Left-Side
Components
A. V-Belt Cover
B. Driven Pulley
C. Clutch Cover
D. Oil Pump
1. Remove the cap screws securing the V-belt cover
noting the location of the different-lengthed cap
screws for installing purposes; then using a rubber
mallet, gently tap on the cover tabs to loosen the
cover. Account for two alignment pins.
CD079
2. Remove the nut and washer securing the movable
drive face; then remove the face. Account for a
spacer.
CD963
CD966A
3. Remove the V-belt.
4. Remove the bolt (550) or nut (700) securing the
fixed driven assembly; then remove the assembly.
H1-019
PR388
5. Remove the fixed drive face.
6. Remove the cap screws securing the clutch cover.
Note the location of the different-lengthed cap
screws for installing purposes. Using a rubber mallet,
carefully remove the cover. Account for two align-
ment pins.
CD973A
CAUTION
Care must be taken when removing the cover so the
cover gasket is not damaged.
550
700