184
PR729C
15. Remove the lower differential mounting cap screw.
Account for a lock nut and four washers. Note the
position of the washers for assembling.
PR205A
16. Remove the upper differential mounting cap screw.
Account for a lock nut and two washers.
CD016
17. Free the differential assembly from the frame mount-
ings; then lower the differential through the frame.
Disassembling Input Shaft
1. Using a T-40 torx wrench, remove the cap screws
securing the pinion housing.
GC004A
2. Using a rubber mallet, remove the housing. Account
for a gasket. Remove the fork, collar, and spring.
Note the location of all the components for assem-
bling purposes.
GC015
CD106
3. Remove the snap rings from the input shaft; then
remove the input shaft from the pinion housing.
GC009A