206
3. Remove the cap screws securing the propeller shaft
flange to the yoke flange on the appropriate
drive-line; then remove the propeller shaft.
PR120A
PR121
4. Install U-Joint Separator Tool on the universal joint
fixed yoke; then remove the bearing cup retainers.
PR354A
5. Using a suitable socket and ratchet handle, rotate the
jackscrew to push the bearing cup out of the yoke;
then remove the tool and the bearing cup.
PR359
6. Install the separator tool on the opposite side of the
yoke to push the second bearing cup from the yoke;
then remove the tool and separate the universal joint.
7. Secure the separator tool in a vise and repeat steps
4-6 to remove the bearing cups from the movable
yoke.
PR375
INSPECTING
1. Inspect the yoke bores for damage or signs of bear-
ing cup looseness. If bearing cups are loose, the yoke
must be replaced.
PR367B
2. Check that yoke legs are parallel.