66
INSTALLING
1. Using a block to hold the front body open, place the
gas tank into position in the frame making sure the
heat shield is in position.
KC262
KC252A
2. Using a suitable block, support the rear of the tank
and connect the gasline hose to the gas tank valve
outlet.
KC241A
3. Remove all blocking and secure the gas tank with the
cap screw. Tighten securely; then connect the gasline
connector to the fuel pump outlet.
KC225A
4. Secure the rear of the front body to the frame with
the cap screws (A) and tighten securely; then install
the gas tank cover and secure with the reinstallable
rivets (B).
KC219A
5. Install the side panels and seat making sure it locks
securely in place. connect the negative battery cable
and check for leaks.
Oil Filter/Oil Pump
NOTE: Whenever internal engine components wear
excessively or break and whenever oil is contami-
nated, the oil pump should be replaced. The oil pump
is not a serviceable component.
Testing Oil Pump
Pressure
1. Connect the Tachometer to the engine.
2. Connect the Oil Pressure Test Kit to the oil filter
drain plug.
Manual
Table of Contents
