49
MD1020
18. Remove three screws holding the oil pump and
remove the oil pump. Account for two alignment pins.
MD1060
Servicing Right-Side
Components
NOTE: Whenever a part is worn excessively,
cracked, damaged in any way, or out of tolerance,
replacement is necessary.
INSPECTING CENTRIFUGAL
CLUTCH SHOE
1. Inspect the clutch shoe for uneven wear, chips,
cracks, or discoloration.
2. Inspect the depth of the grooves in the clutch shoes.
If any shoe is worn to the bottom of the groove,
replace the complete set.
ATV1014
INSPECTING CENTRIFUGAL
CLUTCH HOUSING
1. Inspect the clutch housing for burns, marks, scuffs,
cracks, scratches, or uneven wear.
2. If the housing is damaged in any way, the housing
must be replaced.
INSPECTING PRIMARY ONE-WAY
DRIVE
1. Place the one-way clutch onto the clutch shoe assem-
bly with the green dot or the word “OUTSIDE”
directed away from the clutch shoe.
KC330
2. Place the clutch housing onto the clutch
shoe/one-way clutch.
NOTE: It will be necessary to rotate the clutch hous-
ing counterclockwise to properly seat the one-way
clutch.
KC331A
AT THIS POINT
To service clutch components, see Servicing Right-Side
Components sub-section.
AT THIS POINT
To service center crankcase components only, proceed
to Separating Crankcase Halves.
CAUTION
Always replace clutch shoes as a complete set or
severe imbalance could occur.
Manual
Table of Contents
