Arbiter Systems 931A, Operation Manual

Page: 135 / 161

#3 = 1 through 12, month
#4 = 1 through 31, day of month
#5 = 0 through 23, hour of day
#6 = 0 through 59, minute of hour
#7 = 0 through 59, seconds of minute
A.3.39 Scale On/Off (SOO)
Command: #SOO
Globally activates or deactivates input scale corrections. The scale factors
are set for individual inputs using the SSC command.
# To select
0 All scale factors, including PT/CT, OFF
1 All individual scale factors ON
2 Enable PT/CT ratios
A.3.40 DSP Speed (SPD)
Command: #1,s/r#SPD
#1 To select
0 Slow mode
1 Fast mode
s/r#
0
To set speed
1 To return speed
A.3.41 Phase Preference, Set (SPH)
Command:
#SPH
Specify the format for phase display.
# Phase Format
0
±
180 degrees leading (negative display means Channel
2 lagging Channel 1)
1
±
180 degrees lagging (positive display means Channel 2
lagging Channel 1)
2 0 to 360 degrees leading (negative display means Chan-
nel 2 lagging Channel 1)
3 0 to 360 degrees lagging (positive display means Channel
2 lagging Channel 1
119