Arbiter Systems 931A, Operation Manual

Page: 84 / 161

range selection menu varies and depends on the selected input type (see
Section 3.8.1.2 for a description of available Input Types).
When the
Model 931A is configured to test a voltage transducer, the display shows
following selection menu:
Custom allows the user to determine the upper and lower limits of the
measurement range. Determine a custom range, as a part of this sub-menu,
for all input types. See Section 3.3.3 for Data Entry Function description.
3.8.1.4 Output Range
Select Output Range from the Transducer Configuration menu to view the
following sub-menu:
The Model 931A allows these output ranges when the transducer
outputs are connected to the transducer terminals on the front panel.
Within the ranges shown, the Model 931A accepts either voltage or
current signals. Refer to Section 3.8 for details on connecting transducer
inputs, and Section 3.3.3 for a description on data entry.
ˆ
Custom V allows the user to enter a voltage range within the limits
of 0 to 10 volts DC.
ˆ
Custom mA allows the user to enter a current range within the limits
of 0 to 100 milliamperes DC.
ˆ
Custom Pulse allows the user to setup the Model 931A to accept
a calibrated pulse from the transducer that is proportional to the
measured transducer value.
3.8.1.5 Display Input As
Select Display Input As from the Transducer Configuration menu and press
the ENTER key to view the following sub-menu:
68