59
JOB FUNCTIONS
15.4
Home > Tank
Manages tank filling. The management mode will change according to the device set for the tank level reading
(chap.
.
From “Home” screen, press
.
Range
Tank level
Fig. 130
Press to reset the tank level
Press to set the quantity of liquid
filled in
the tank
Press to set the quantity of liquid
present
in the tank
Press to set tank level to the maximum value
•
Tank level source
:
Level sensor
The computer displays the real quantity of fluid inside the tank, detected by the level sensor.
•
Tank level source
:
Manual
/
Filling flowmeter
The computer calculates the quantity of fluid inside the tank (by processing the job data), and allows to enable several manual procedures:
- Level reset.
- Filled quantity manual setup.
- Tank level manual setting.
- Complete filling, according to the tank capacity.
LEVEL RESET
1
2
Fig. 131
1 - 2
Press to set tank level to zero.
The display will show the tank as empty.
FILLED QUANTITY MANUAL SETUP
1
3
2
Fig. 132
1
Press to set the quantity of liquid filled in the tank.
2 - 3
Set the value and confirm.
The display will show the tank level that has been
reached.
It is not possible to set values higher than
tank total capacity.
CONTINUES
Summary of Contents for 4679004
Page 75: ...Notes 75...
