ARAG 4679004, Installation, Use And Maintenance Manual

Page: 42 / 76

42
DATA AND SETTINGS
Quits without confirming the
changes
Saves the changes
Cancel
Exits
Confirm
Goes back to previous menu,
or scrolls the pages of a menu
(previous page)
Scrolls the pages of a menu
(next page)
Goes back to main screen
Saves the changes to current
page
12.7.2
Data and settings > System status > ISOBUS
1 2
3
5
6
4
Fig. 94
Displays information on ISOBUS protocol.
1
Allows changing the VT on which the OP is displayed in case more terminals are connected.
2
Allows deleting and reloading the ECU OP.
3
Allows changing the VT with which data can be exchanged through the TC in case more
terminals are connected.
4
Allows accessing the menu for the selection of the source from which the data provided by
the Tractor ECU present in the system will be received.
5
Select the source from which you wish to receive ISOBUS messages relating to system
shutdown (Maintain Power) and vehicle driving speed if the latter is transmitted on the message
relating to the speed of rotation of the wheel or a mechanical part of the tractor. (
Home > Data
and settings > Implement settings > Speed > Tractor wheel
Par. 11.6 ).
6
Select the source from which you want to receive the ISOBUS message relevant to the
vehicle driving speed if the latter is transmitted on the message relevant to the radar installed
on the tractor (
Home > Data and settings > Implement settings > Speed > Tractor radar
Par. 11.6 ).
Available speed sources:
Accept all : IBX100 will use the data contained in the relevant messages, regardless of the
source they come from.
TECU
: IBX100 will only use the message coming from the Tractor ECU present in the system.
VT
: IBX100 will only use the message coming from the Virtual Terminal present in the system.
1
Fig. 95
It displays information about the File Server function if it is also available in the connected
Virtual Terminal.
1
Allows changing the File Server in case more VTs are connected.