ARAG 4679004, Installation, Use And Maintenance Manual

Page: 31 / 76

31
IMPLEMENT SETTINGS
11.10
Home > data and settings > implement settings > Implement geometry
1
Select the type of implement connection.
2 - 3 - 4
Enter the selected implement dimensions.
5
Enable / disable the option, for booms with center section offset from the rest of the boom; enter the measurement.
1
2
3
4
5
Fig. 58
Check Virtual Terminal settings: if a specific menu is available (varying
based on your VT) to program machine geometry, it has the priority
over the ECU menu.
Axle to connect. point Boom to connect. point Boom lateral offset
Fig. 59 Fig. 60
*
Fig. 61
*
Boom lateral offset
Application point
Longitudinal axis
- 1.50 m
NEGATIVE VALUES:
the application point is
to the left of the
longitudinal axis
 
Fig. 62
Application point Longitudinal axis
+ 1.50 m
POSITIVE VALUES:
the application point is to the
right of the
longitudinal axis
 
Fig. 63
Offset longitudin. center section
Fig. 64