48
DATA AND SETTINGS
Quits without confirming the
changes
Saves the changes
Cancel
Exits
Confirm
Goes back to previous menu,
or scrolls the pages of a menu
(previous page)
Scrolls the pages of a menu
(next page)
Goes back to main screen
Saves the changes to current
page
12.7.5
Data and settings > System status > Registration
Should it be necessary to re-enter the registration code supplied with the ECU, proceed as follows.
REGISTRATION
1
Press to enter registration code.
2
Type in the code and confirm with key
3
.
2
3
1
Fig. 104
12.7.6
Seletron status
This menu has two main functions:
• INSTALLATION
Allows to display the progress during Seletron's pairing procedure (chap. 13 Seletron connection).
• DIAGNOSTICS
Allows to check the connection of each single Seletron.
CARRY OUT BOTH PROCEDURES WITH RUNNING ENGINE.
SELETRON CONNECTION DIAGNOSTICS
Color legend:
Correct operation.
Seletron does not respond.
Power supply error on Seletron devices: power voltage lower than the allowed value.
From screen Fig. 105 it is possible to display the relevant number.
Fig. 105
If necessary, you can and repeat the pairing procedure for each Seletron device:
BEFORE STARTING A NEW PAIRING PROCEDURE, YOU MUST RESET THE
PREVIOUSLY ALLOCATED IDENTIFICATION NUMBERS.
Use function
ID Reset
(par.
Summary of Contents for 4679004
Page 75: ...Notes 75...
