ARAG 4679004, Installation, Use And Maintenance Manual

Page: 54 / 76

54
JOB FUNCTIONS
B B
AA
CC
14 USE
14.1 “HOME” main screen
DISPLAY ITEMS
MENU SELECTION BUTTONS
Tank filling management ( par. 15.4 )
Main control ON/OFF ( par. 15.5 )
*Management of Syncro ISOBUS functions ( par. 16.2 )
Automatic functions ( par. 15.3 )
Displays job information / alarms ( par. 15.2 )
* Change of target rate ( par. 15.1 )
*This figure differs from what is actually displayed on the device:
When the button related to the Syncro
B B
function is present, the button to modify the application rate
A A
is NOT present .
To modify the application rate with the Syncro function active, press area
C C
and follow the instructions in par. 15.1 .
Data and settings ( chap. 12 )
Boom width ( par. 11.1 )
Missing tank profile
Output variation
Every symbol corresponds to a
10% variation: + 10% - 10% (max. ± 50%)
Job datum - RIGHT side
Pressure range end-value
Job preset / used nozzle (
par. 12.1 )
Pressure
Job datum - LEFT side
Increases / decreases the
simulated speed value
Spraying boom (
par. 15.5 )
Instant output
Target rate
Speed
Speed range end-value
Auxiliary Input ON/OFF ( par. 11.11 )
Task Controller function status (par. 11.11 ) :
ON/OFF variable application
ON/OFF section automatic management
Check of ON / OFF job counters
Tank level (text and graphic),
alternated with range on surface
ON/OFF automatic regulation ( par. 15.3.1 )
Automatic nozzle selection ON/OFF ( par. 15.3.2 )
Pressure higher than threshold / Nozzle flowrate
higher than threshold
Pressure lower than threshold /
Nozzle flowrate lower than threshold
Enabled alarm ( par. 15.3 )
Tank profile present