ARAG 4679004, Installation, Use And Maintenance Manual

Page: 11 / 76

11
INSTALLATION
8
If space is limited and you need to bend a cable, be sure not to bend it too tight or it may get damaged.
MIN. RADIUS 12 cm
Fig. 15
9
Position the cable so that branches
A
are equally spaced from Seletron connectors
B
.
Fig. 16
10
Secure the branches to the boom threading the ties through the suitable recesses.
Fig. 17
11
When installing a twin or fourfold nozzle holder, make sure that all connectors are facing the same direction, or the computer might select the
wrong nozzle.
Fig. 18
For special needs it is possible to install two nozzles on boom ends that can work instead of the standard outer nozzles.
12
Any Seletron connectors left unused must be closed using the suitable plugs (code ECS0075). The plugs must be ordered separately.
When the connectors are plugged off, the Seletron is sealed. To avoid damaging the internal components, make sure that when using or cleaning
the system the plugs and the connectors are not bare or inserted incorrectly.
Fig. 19
WARNING!
DO NOT CONNECT THE SELETRON
UNITS.
THE SELETRON ELECTRIC
CONNECTORS MUST BE CONNECTED
AT A LATER TIME, DURING THE PAIRING
PROCEDURE (chap. "13 Seletron
connection" on page 50 ).
WARNING: TO AVOID DAMAGING ONE OR MORE DEVICES, MAKE SURE THAT NONE OF THE PARTS OF EACH SINGLE
SELETRON (BODY, HARNESSES, ETC.) COME INTO CONTACT WITH MOVING PARTS AT ANY TIME WHEN THE SYSTEM IS IN
USE (INSTALLATION, COMMISSIONING, USE AND SHUTDOWN OF THE FARMING MACHINE).
Arag will not be held responsible for any damage to the system, people, animals or objects caused by failure to follow the
guidelines outlined above.