ARAG 4679004, Installation, Use And Maintenance Manual

Page: 18 / 76

18
BASIC SETTINGS
10 IMPLEMENT SETTINGS > BASIC SETTINGS
1
Fig. 30
Upon first switching on, enter the device basic settings.
For a correct use of the keys during setting, refer to par. 9.2.
2
Fig. 31
3
Fig. 32
4
Fig. 33
BASIC SETTING PROCEDURE START
- VT will guide you during the configuration: follow the steps and select the desired
options.
previous step; next step
- When the message
Confirm change to settings
configuration is complete.
Press .
BASIC SETTINGS MENU
•
Sprayer technology
Valves : system with electrically operated valves - with gearmotor / Seletron : system with Seletron valves.
•
Main valve type
: type of main control valve installed on the control unit.
None , 2 ways (drain valve), 3 ways (main valve).
•
Type of regulating valve
: type of control valve installed on the control unit.
Standard (7s) / Fast (3.5s) / Ultra fast (2s) .
•
Boom settings
: nozzle holder boom type (system with section valves).
Single (single boom) / Dual (dual boom).
•
Spraying spot type
: type of Seletron (system with Seletron).
1 single / 2 twin / 4 fourfold.
•
Flowrate reference sensor
: device used to calculate flowrate.
Flowmeter : the measured flowrate is used for regulating the application rate.
Pressure sensor
: the measured pressure is used for application rate regulation.
Both
: the application rate is regulated using the flowmeter, when the working flowrate is within its reading range;
outside the range the system uses the installed pressure sensor.
•
Terminal nozzle type
None
Buffer zone
: allows enabling the use of nozzles at the "Buffer zone" see par. 16.1 (ONLY FOR SELETRON SYSTEM)
“Fence”
: allows using the “Fence” nozzles, see par. 16.1.
•
Tank level source
: device used to read tank level.
- Manual
: no device connected
- Filling flowmeter
- Level sensor
: by selecting this option in the HOME page, this icon will be displayed on the tank.
The icon with red background indicates that NO calibration curve is present.
Instructions for creating one can be found in par. 11.9.3 on page 28.
The icon background turns green when a calibration curve is associated .
BASIC SETUP PROCEDURE IS NOW COMPLETE: WHEN RETURNING TO THE HOME PAGE, THE SYSTEM RESTARTS AUTOMATICALLY.
NOW IT IS POSSIBLE TO START THE ADVANCED SETUP PROCEDURE, DESCRIBED IN CHAP. 11 .